Manruta 20 Pack Universal Standard ISO Pet ID Microchip Tags 134.2Khz FDX-B Smaller Size 8 MM Length for Dogs and Cats Small Animals (1.4X8mm Microchip)

Chip Type: Read and write , Made from Germany.
Frequency:(Adjust) ASK, 134.2 KHz
Protocol: ISO 11785 & ISO 11784 / FDX-B
Write Times: > 1,000,000 times
Dimension Diameter :about 1.4 mm Length : about 8 mm
Working Time > 20 years, In fact can last the life with your Pets.
Read Range 30 - 500 mm,Depand on the reader you use .


How to inject it?
1, scan the animal, make sure there is no microchip in your pet
2, make sure that the packing is undamaged and then open the package
3, take out the syringe and barcodes
4, remove the red limit card of the syringe and open the lid. Attention:Remember that the needle tip must not be lowered to prevent microchips from coming out.
5, clean the parts of the animals that will be injected with iodine
6 use your left hand pinches the skin and use your right hand to hold the syringe, and the needle is better 15 degrees to the skin.
7, the right hand pushes the syringe to the bottom, and it will hear a click, and use cotton ball to hold the injection site and gently pull out the needle.
8, hold the injection site for 10 seconds with cotton ball, which is good for wound closure.
9, using a scanner to read the chip
10, it will display 15 ID numbers on scanner

Features

{Microchip Quality is Very Important }:Manruta Microchip, from Germany ,well made with high quality bioglass ,last the life of your pets? can be scanned well. If you buy Low Quality Microchip, will stop work one day or broke in your pet

Specification

Product Detail
Brand	Manruta
Color	Red
Size	1.4X8mm microchip
Weight	0.00