What is the size of the Andis Carbon Infused Steel UltraEdge Dog Clipper Blade?

The blade measures four and four-fifths inches in length, three and a half inches in width, and one and a half inches in height.

What material is the Andis UltraEdge dog clipper blade made of?

The blade is made from carbon-infused high-carbon steel, which provides a harder cutting surface and improved durability.

What is the cut length of this clipper blade?

The blade has a cut length of one-quarter inch, suitable for various grooming needs.

How do I use the Andis UltraEdge dog clipper blade?

To use the blade, attach it securely to a compatible clipper and groom the coat as needed, ensuring proper oiling before each use.

Is this clipper blade suitable for all dog breeds?

This clipper blade is particularly effective for terriers, including wire Welsh and Lakeland terriers, offering a nice finish.

Can I use the Andis UltraEdge blade on other clippers?

Yes, this blade is compatible with Andis, Conair, Oster, and Wahl detachable-style clippers.

How should I care for my Andis clipper blade?

You should oil the blades at least once a day, ideally before each grooming session, and clean them thoroughly after use.

What type of oil should I use for the clipper blade?

Use a few drops of clipper oil specifically designed for grooming blades to ensure proper lubrication and performance.

How do I clean the Andis UltraEdge clipper blade?

Immerse the blades in clipper oil or blade cleaner while the clipper is running, then dry them with a clean cloth.

Is the Andis UltraEdge clipper blade rust-resistant?

Yes, the chrome finish of the blade resists rust, enhancing its longevity and performance.

What is the Rockwell hardness rating of this clipper blade?

The Rockwell hardness rating of this clipper blade is sixty-five, indicating its durability and sharpness.

Can this blade be used for a raking effect?

Yes, the skip-tooth design allows for a raking effect to blend the coat, particularly useful for certain breeds.

What should I do if the clipper blade leaves streaks while grooming?

If the blade leaves streaks, it likely needs oil. Apply oil and ensure it is clean to improve cutting performance.

How often should I sharpen the Andis clipper blade?

The blade holds a sharp edge for prolonged use, but regular sharpening may be necessary depending on usage frequency.

What safety precautions should I take while using the clipper blade?

Always ensure the blade is securely attached to the clipper and avoid using it on wet fur to prevent damage.

Andis Carbon Infused Steel Ultraedge Dog Clipper Blade, Size-5 Skip Tooth, 1/4-Inch Cut Length (64079),Chrome

Andis Carbon Infused Steel Ultraedge Dog Clipper Blade, Size-5 Skip Tooth, 1/4-Inch Cut Length (64079),Chrome

$71.78
Regular price ~~$102.54~~
Will be in stock after

Join Waitlist

Wishlist

Vendor: Andis

Type: Grooming

Sku: WBPETB00063MROS

Available: Sold Out

Sold by Petocart, an authorized reseller.

Returns accepted within 30 days | support@petocart.com

✓ Verified

Shipping Information

Free Standard Shipping — United States only
Processing Time: 1–3 business days
Estimated Delivery: 3–5 business days after dispatch
Safely packaged to keep your pet's products fresh & intact
Tracking number sent via email once dispatched
Orders over $250 require signature upon delivery. Taxes calculated at checkout.

Returns & Refund

Returns accepted within 30 days of delivery.

Damaged or Defective Item

Free return shipping + replacement or full refund

Wrong Item Received

Free return shipping + replacement or full refund

Change of Mind

Return shipping at customer's expense · Restocking fee may apply

All returns require a Return Authorization (RA) number before sending.

To initiate a return, contact us:

support@petocart.com +1 281-738-1130

Safety & Compliance

Some products sold on this website may expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.

www.P65Warnings.ca.gov

Consult your veterinarian before use if your pet has a known medical condition, is pregnant, nursing, or is on medication.

Keep out of reach of children. For animal use only.

Always read labels, directions, and ingredient lists before use. Discontinue use and contact your vet if your pet shows signs of adverse reaction.

Guarantee safe checkout

Andis Carbon Infused Steel Ultraedge Dog Clipper Blade, Size-5 Skip Tooth, 1/4-Inch Cut Length (64079),Chrome

$71.78

Description

This UltraEdge dog clipper blade is made from high-carbon steel and processed through a unique carburizing heat treatment that actually adds carbon to the metal. More carbon on the metal means a harder cutting surface. Blades hold a razor sharp edge that will endure prolonged use and more sharpening treatments. Use for the finishing and blending of terriers. Blade is sharpened to exact quality stan dards and is h and-tested before it is shipped. Blade sets should be oiled once a day minimum. Ideally, it should be done before every grooming. After oiling, be sure to use a soft, dry cloth to wipe any oil off the external surfaces to reduce the possibility of getting it on the animal's coat. If the clipper blades leave streaks or slow down, it's a sure sign that the blades need oil. Oiling Blades - Place a few drops of blade oil on the front and side of the cutter blades. Wipe excess oil off blades with a soft, dry cloth. Spray lubricants contain insufficient oil for good lubrication, but are an excellent clipper blade coolant. Cleaning Blades - Immerse blades only while clipper is running in a shallow pan of clipper oil or blade cleaner. After cleaning, turn the clipper off and dry blades with a clean, dry cloth. If blades will still not cut, there may still be some hair trapped between the upper and lower blade. Remove the blade off the clipper and slide the upper blade to one side without loosening the tension spring or moving the upper blade completely out from under the tension spring. Wipe the surfaces of the blades clean with a dry cloth, then place a drop of clipper oil where the upper and lower blades meet and also in the guide slot of the tension spring. Comes in size-5 skip tooth and 1/4-inch cut length. Measures 4-4/5-inch length by 3-1/2-inch width by 1-1/2-inch height.

Frequently Asked Questions

Q: What is the size of the Andis Carbon Infused Steel UltraEdge Dog Clipper Blade? A: The blade measures four and four-fifths inches in length, three and a half inches in width, and one and a half inches in height.
Q: What material is the Andis UltraEdge dog clipper blade made of? A: The blade is made from carbon-infused high-carbon steel, which provides a harder cutting surface and improved durability.
Q: What is the cut length of this clipper blade? A: The blade has a cut length of one-quarter inch, suitable for various grooming needs.
Q: How do I use the Andis UltraEdge dog clipper blade? A: To use the blade, attach it securely to a compatible clipper and groom the coat as needed, ensuring proper oiling before each use.
Q: Is this clipper blade suitable for all dog breeds? A: This clipper blade is particularly effective for terriers, including wire Welsh and Lakeland terriers, offering a nice finish.
Q: Can I use the Andis UltraEdge blade on other clippers? A: Yes, this blade is compatible with Andis, Conair, Oster, and Wahl detachable-style clippers.
Q: How should I care for my Andis clipper blade? A: You should oil the blades at least once a day, ideally before each grooming session, and clean them thoroughly after use.
Q: What type of oil should I use for the clipper blade? A: Use a few drops of clipper oil specifically designed for grooming blades to ensure proper lubrication and performance.
Q: How do I clean the Andis UltraEdge clipper blade? A: Immerse the blades in clipper oil or blade cleaner while the clipper is running, then dry them with a clean cloth.
Q: Is the Andis UltraEdge clipper blade rust-resistant? A: Yes, the chrome finish of the blade resists rust, enhancing its longevity and performance.
Q: What is the Rockwell hardness rating of this clipper blade? A: The Rockwell hardness rating of this clipper blade is sixty-five, indicating its durability and sharpness.
Q: Can this blade be used for a raking effect? A: Yes, the skip-tooth design allows for a raking effect to blend the coat, particularly useful for certain breeds.
Q: What should I do if the clipper blade leaves streaks while grooming? A: If the blade leaves streaks, it likely needs oil. Apply oil and ensure it is clean to improve cutting performance.
Q: How often should I sharpen the Andis clipper blade? A: The blade holds a sharp edge for prolonged use, but regular sharpening may be necessary depending on usage frequency.
Q: What safety precautions should I take while using the clipper blade? A: Always ensure the blade is securely attached to the clipper and avoid using it on wet fur to prevent damage.

Andis Carbon Infused Steel Ultraedge Dog Clipper Blade, Size-5 Skip Tooth, 1/4-Inch Cut Length (64079),Chrome

Guarantee safe checkout

Andis Carbon Infused Steel Ultraedge Dog Clipper Blade, Size-5 Skip Tooth, 1/4-Inch Cut Length (64079),Chrome

Related products

Frequently Asked Questions

Recently viewed