What is the length and diameter of the PENN-PLAX Cascade Heat Aquarium Heater?

The heater is eight and a half inches long and has a diameter of one point one inches.

What is the wattage and voltage of this aquarium heater?

The heater operates at one hundred watts and requires one hundred ten volts.

Is the aquarium heater made of durable materials?

Yes, it is composed of heavy-duty and shock-resistant glass for added durability.

How do I set the temperature on the Cascade Heat Aquarium Heater?

To set the temperature, use the red control knob to adjust it between sixty-eight degrees Fahrenheit and eighty-nine degrees Fahrenheit.

Is this heater suitable for large fish tanks?

Yes, this heater works well for fifteen to twenty-gallon fish tanks.

Can I place the heater horizontally or vertically?

Yes, the heater can be positioned either horizontally or vertically in the aquarium.

How do I ensure the heater is safe to use?

Always submerge the heater in water before turning it on, and never operate it outside of the aquarium.

What should I do after placing the heater in the aquarium?

Wait fifteen minutes after placing the heater in the aquarium before turning it on to allow the thermostat to adjust to the water temperature.

How do I clean the aquarium heater?

To clean the heater, simply wipe it down with a damp cloth; avoid using harsh chemicals.

Is there a minimum water level indicator on the heater?

Yes, the heater features a built-in minimum water level indicator colored in red.

What happens if the heater arrives damaged?

If the heater arrives damaged, contact customer support to initiate a return or exchange process.

Does this heater have a pilot light for heating status?

Yes, the heater includes an orange pilot light that indicates when the heating cycle is active.

Can this heater be used for both freshwater and saltwater tanks?

Yes, this aquarium heater is safe for use in both freshwater and saltwater fish tanks.

What should I do if the heater makes a clicking sound?

A faint click sound is normal when the heater turns off as part of the heating cycle.

Is there a warranty for the PENN-PLAX Cascade Heat Aquarium Heater?

Please check with the retailer for warranty details, as they may vary by seller.

What is the temperature accuracy of this heater?

The heater maintains a water temperature with a one-degree accuracy.

Penn-Plax Cascade Heat Aquarium Heater – Fully Submersible – Great For Freshwater And Saltwater Fish Tanks – 8.5” Length – 100 Watt

Penn-Plax Cascade Heat Aquarium Heater – Fully Submersible – Great For Freshwater And Saltwater Fish Tanks – 8.5” Length – 100 Watt

$29.73
Regular price ~~$42.47~~
Will be in stock after

Join Waitlist

Wishlist

Vendor: Penn-Plax

Type: Filters & Media

Sku: WBPETB000VO9CWC

Available: Sold Out

Sold by Petocart, an authorized reseller.

Returns accepted within 30 days | support@petocart.com

✓ Verified

Shipping Information

Free Standard Shipping — United States only
Processing Time: 1–3 business days
Estimated Delivery: 3–5 business days after dispatch
Safely packaged to keep your pet's products fresh & intact
Tracking number sent via email once dispatched
Orders over $250 require signature upon delivery. Taxes calculated at checkout.

Returns & Refund

Returns accepted within 30 days of delivery.

Damaged or Defective Item

Free return shipping + replacement or full refund

Wrong Item Received

Free return shipping + replacement or full refund

Change of Mind

Return shipping at customer's expense · Restocking fee may apply

All returns require a Return Authorization (RA) number before sending.

To initiate a return, contact us:

support@petocart.com +1 281-738-1130

Safety & Compliance

Some products sold on this website may expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.

www.P65Warnings.ca.gov

Consult your veterinarian before use if your pet has a known medical condition, is pregnant, nursing, or is on medication.

Keep out of reach of children. For animal use only.

Always read labels, directions, and ingredient lists before use. Discontinue use and contact your vet if your pet shows signs of adverse reaction.

Guarantee safe checkout

Penn-Plax Cascade Heat Aquarium Heater – Fully Submersible – Great For Freshwater And Saltwater Fish Tanks – 8.5” Length – 100 Watt

$29.73

Description

Cascade presents the 100W LED Aquarium Heater by PENN-PLAX.This heater easily maintains healthy water temperature within a 1° accuracy,and can be set anywhere between 68 ℉ and 89 ℉, by using the red control knob.Our Cascade Aquarium Heaters are factory set to 76 ℉,and are safe for either freshwater or saltwater fish tanks.The 100W model works great for 15 – 20 gallon tanks.Visible & Accurate Temperature Scale:With an easy to read setting scale in both Celsius and Fahrenheit,it’s easy to see the temperature adjustments being made.To increase the temperature, rotate the control knob counter-clockwise,and to decrease, rotate it clockwise;or, follow the + and – symbols located near the control knob.Orange Pilot Light:Our Cascade Heat Aquarium Heaters feature a pilot light that indicates the heating cycle status.This means that it will go on and off by itself as the thermostat cycles the heating element on and off.In other words, orange light = heater is on.Similarly, these aquarium heaters make a faint click when turning off.Additional Features:In addition to being composed of heavy-duty and shock-resistant glass,these fully submersible aquarium heaters can be placed either horizontally or vertically.There’s also a built-in minimum water level indicator at the top, colored in red.Please Note:Do not operate heater outside of aquarium, and never submerse a hot heater into an aquarium – only submerse a cool heater.After placing the heater into your aquarium, wait 15 minutes before turning on.This allows the thermostat to adjust itself to water temperature.Measurements:Overall Length = 8.5”Overall Diameter = 1.1”Suction Cup Diameter = 1.25”Wattage = 100WVoltage = 110V

Frequently Asked Questions

Q: What is the length and diameter of the PENN-PLAX Cascade Heat Aquarium Heater? A: The heater is eight and a half inches long and has a diameter of one point one inches.
Q: What is the wattage and voltage of this aquarium heater? A: The heater operates at one hundred watts and requires one hundred ten volts.
Q: Is the aquarium heater made of durable materials? A: Yes, it is composed of heavy-duty and shock-resistant glass for added durability.
Q: How do I set the temperature on the Cascade Heat Aquarium Heater? A: To set the temperature, use the red control knob to adjust it between sixty-eight degrees Fahrenheit and eighty-nine degrees Fahrenheit.
Q: Is this heater suitable for large fish tanks? A: Yes, this heater works well for fifteen to twenty-gallon fish tanks.
Q: Can I place the heater horizontally or vertically? A: Yes, the heater can be positioned either horizontally or vertically in the aquarium.
Q: How do I ensure the heater is safe to use? A: Always submerge the heater in water before turning it on, and never operate it outside of the aquarium.
Q: What should I do after placing the heater in the aquarium? A: Wait fifteen minutes after placing the heater in the aquarium before turning it on to allow the thermostat to adjust to the water temperature.
Q: How do I clean the aquarium heater? A: To clean the heater, simply wipe it down with a damp cloth; avoid using harsh chemicals.
Q: Is there a minimum water level indicator on the heater? A: Yes, the heater features a built-in minimum water level indicator colored in red.
Q: What happens if the heater arrives damaged? A: If the heater arrives damaged, contact customer support to initiate a return or exchange process.
Q: Does this heater have a pilot light for heating status? A: Yes, the heater includes an orange pilot light that indicates when the heating cycle is active.
Q: Can this heater be used for both freshwater and saltwater tanks? A: Yes, this aquarium heater is safe for use in both freshwater and saltwater fish tanks.
Q: What should I do if the heater makes a clicking sound? A: A faint click sound is normal when the heater turns off as part of the heating cycle.
Q: Is there a warranty for the PENN-PLAX Cascade Heat Aquarium Heater? A: Please check with the retailer for warranty details, as they may vary by seller.
Q: What is the temperature accuracy of this heater? A: The heater maintains a water temperature with a one-degree accuracy.

Penn-Plax Cascade Heat Aquarium Heater – Fully Submersible – Great For Freshwater And Saltwater Fish Tanks – 8.5” Length – 100 Watt

Guarantee safe checkout

Penn-Plax Cascade Heat Aquarium Heater – Fully Submersible – Great For Freshwater And Saltwater Fish Tanks – 8.5” Length – 100 Watt

Related products

Frequently Asked Questions

Recently viewed